Shure PGXD24/SM58 Digital Wireless System Handheld SM58 Microphone Transmitter

  
Shure PGXD24/SM58 Digital Wireless System Handheld SM58 Microphone Transmitter. Wireless System with SM58 Mic.

Customer Return with Original Packaging. The PGXD24/SM58 Handheld Transmitter with SM58 Mic is designed to meet the needs of the traveling performer by pairing an industry-standard handheld dynamic vocal microphone with an exceptional transmitter and receiver. The PGXD2 transmitter features automatic setup, a multi-function LED Indicator (power, lockout, mute, low battery), and provides you with 8 hours of continuous use on 2 AA batteries.

It gives you and your microphone a generous 200' (60m) operating range without losing audio quality. The PGXD4 receiver offers 24-bit/48kHz accurate sound, offers technology for incredibly accurate sound, auto frequency selection, and greater reliability thanks to its true digital diversity. The Shure SM58 mic is legendary for its uncanny ability to withstand abuse that would destroy any other microphone. The Shure SM58 has not only helped to define the sound of rock vocals on stage, it's also been used as a hammer to build stages and gone on to perform flawlessly later at the gig. Using a club's house system?

You'll be singing through an SM58. Daniel Lanois always uses the SM58 or Beta 58 on Bono's vocals. The Shure SM58 mic is world-renowned for its distinctive upper-midrange presence peak that ensures an intelligible, lively sound. Perfectly fits a performer's hand, balanced for total comfort during long gigs. Frequency response is a smooth, vocal-tailored 50Hz-15kHz, and the price is a bargain considering its life expectancy.

Besides the SM58 microphone, you also get a PGXD4 wireless receiver, PGXD2 handheld transmitter, padded case, and a microphone clip. Power, mute, and battery status LED. Up to 9 hours of continuous use from 2 AA batteries. Lockable interface prevents accidental setting changes. Rugged construction for reliable performance show after show.

24-bit / 48kHz digital technology for incredibly accurate sound. Automatic frequency selection locates a clear channel instantly. One-touch sync automatically syncs the transmitter and receiver. True digital diversity delivers rock-solid wireless signal reliability. Up to 5 systems can be used at once. 1/4 and XLR audio outputs. Uniform cardioid pick-up pattern for maximum gain before feedback and excellent rejection of off-axis sound. Tailored frequency response specifically shaped for vocals, with brightened midrange and bass roll off to control proximity effect. Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration.

Steel-mesh grille and enamel-coated metal construction resist wear and abuse. Effective built in pop-filter reduces undesirable wind and breathe noise. Furnished with zippered storage bag and break-resistant stand adapter. Extremely durable under the heaviest use. Shure quality, ruggedness, and reliability.

+2 dBV maximum at -10dB position. 8 dBV maximum at 0dB position.

RF Transmitter Output: 30 mW maximum (dependent on applicable country regulations). Dimensions including SM58 cartridge: 254mm x 51mm dia. Housing: Molded PC/ABS handle and battery cup. Power Requirements: 2 AA size alkaline or rechargeable batteries.

Battery Life: > 8 hours (alkaline). Dimensions (HxWxD): 40mm x 181mm x 104mm (1.6" x 7.125" x 4.1).

±38kHz deviation, 1kHz tone: XLR connector into 3000? Load: -2.5dBV 1/4 connector into 10000? Image rejection: > 70dB, typical. Impedance balanced Pin 1: Ground (cable shield).

Power Requirements: 12-18 Vdc at 150 mA, supplied by external power supply. Pin Assignments: XLR: 1 = ground, 2 = hot, 3 = cold 6.35mm (1/4) TRS: Tip = audio, Ring = no audio, Sleeve = ground. Frequency response: 50 to 15kHz.

Polar Pattern: Unidirectional (cardioid), rotationally symmetrical about microphone axis, uniform with frequency. Sensitivity (at 1,000Hz Open Circuit Voltage): -54.5dBV/Pa (1.85 mV), 1 Pa = 94dB SPL. Impedance: Rated impedance is 150?

Actual for connection to microphone inputs rated low impedance. Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3. Connector: 3-pin professional audio connector (male XLR type). Case: Dark gray, enamel-painted, die-cast metal; matte-finished, silver, spherical steel mesh grille. Overall dimensions: 6-3/8"L, 2"W.

Net weight: 298g 10.5oz. We are authorized dealers for all these brands. We operate a 30-day return period. A 10% re-stock is more likely if the unit comes back in mint condition.

Also, Items which we do not normally stock i. "Special Orders", discontinued products, close-outs, used products, etc. We strongly suggest that you check your order after receiving it to be sure that it is in proper working order. This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Microphones & Wireless Systems". The seller is "proaudiostar" and is located in this country: US.

This item can be shipped to United States.

1. UPC: 042406190633
2. EAN: 0042406190633
3. Brand: Shure
4. Form Factor: Handheld/Stand-Held
5. Mount Type: None
6. Model: PGXD24/SM58
7. Connectivity: Wireless
8. MPN: PGXD24SM58-X8
9. Features: Noise-Cancelling, On/Off Switch